American Plumbing Co. | San Diego Plumbing Company

San Diego Plumbing Company, $49.00 Drain Cleaning . Serving the Greater San Diego area for over 28 + years.. An A + Rating with the B.B.B.  And a 5 star rating on Google plus, and a 5.0 rating on Yelp.

San Diego Plumbing Company, $49.00 Drain Cleaning . Serving the Greater San Diego area for over 28 + years. An A + Rating with the B.B.B.  And a 5 star rating on Google plus, and a 5.0 rating on Yelp.

San Diego Plumbing Repair: Fixing a Leaky toilet valve. (Replacing With a 400 A Fluid Master).  When your water bill goes up most of the time it can be easily fixed. Because I would say most leaks are in the toilet see the problem is you can't see the inside of the tank so it's not so noticeable or visible to see the leak. ( The Leak is in the toilet tank, usually, there might be water streaming on the side ). Fixing a leak, first check the flapper, most flappers just are rubber. Well, the part that lets water into the toilet bowl. This is the Part I am talking about.  This is the part you replace.  You might also need to replace the 400 A Fluid Master. This is the part that regulates the water flow.  In order to replace this, you need to turn the water off. And take the water supply off and replace the 400 A Fluid Master or the Ballcock. I would also say see a video about this in order to understand what needs to be done. Now the other way that you can determine if it is

A San Diego Plumbing Repair Contractor-Plumber San Diego soldering on a water line.   1. First of all you have to make sure there is no water as this will not allow the pipe to get hot thus solder will not melt. 2. Now that the water has been turned of cut the pipe where the leak is and sand edges with sand cloth, and measure pipe length needed. 3. Now use a fitting brush to sand the inside of the couplings. 4. Now place flux paste on pipe with a brush and place flux inside of couplings. 5  When you join together the fittings. Make sure they are inside the joint when joining the fittings. 6. Now apply the Heat to the fitting moving the torch kind of in a circular motion. And apply the solder. (See a couple of videos to see How soldering is done.) I Always recommend a professional to do the work . For More Plumbing Tips . American Plumbing  100s of 5-Star Reviews . 38 Years of Experience.